parolin. Parolin srl SRL
factoryworkbenchestrolleysgratingsmezzanine floorsturnetyhome
gratingstechnical datasstepsaccessories
ACCESSORIES FOR GRATINGS

 

COMPENSATION STAVES

They have been projected to obtain the desired measures on surfaces made with staves of our production. They are available in two different versions: bulged and holed. The design is the same as in the staves with mm 250 width and than the jonction makes a perfect esthetical result. They have the same groove and tong joint ant the same slots of the staves. They are made out of 12/10 thickness zinc plated sheets. They are always available in our warehouse (standard lenght mm 3.000)

 

Bulged staves

* width mm 50 - code 91-50 B
* width mm 60 - code 91-60 B
* width mm 70 - code 91-70 B
* width mm 80 - code 91-80 B
* width mm 90 - code 91-90 B
* width mm 100 - code 91-100 B
* width mm 110 - code 91-110 B
* width mm 120 - code 91-120 B
* width mm 150 - code 91-150 B
* width mm 200 - code 91-200 B

Holed staves

* width mm 150 - code 91-150 F
* width mm 200 - code 91-200 F

 

bulged compensation staves

 

holed compensation staves

Dimensions:

 

dimensions staves

 

versions available

 

versions available

Standard bulged and holed staves
Bulged staves
Holed staves

 

While combining these staves it is possible to obtain all the desired lengthes (Ex. mm 160 = mm 100 + 60 or 80 + 80)

 

SKIRTING BOARD

 

skirting board

 

Art. 92 - 180 D - S

Skirting board right or left
to be applyed to the gratings.
Height mm 180.
Lenght of the staves mm 3.000.

 

skirting board

 

Art. 92 - 01

Galvanized bracket for skirting junction

bracket 92-01
 

 

CLAMPING BRACKETS

 

bracket 93-11

 

 

Art. 93 - 11

Clamping bracket for galvanized beams IPE type (screw clamping)

Art. 93 - 12

Clamping bracket for galvanized beams IPE type (rapid clamping))

 

From art. 93 - 31 to art. 93 - 44

Clamping bracket for type beams (from dim. h. mm 60 x 30 to h. mm 180 x 50) available in 14 standard dimensions (see price list)

 

 

use on IPE beams

 

 

use on pype beams

bracket 93-12

 

bracket 93-33bracket 93-38

 

JUNCTION BRACKETS

 

bracket 93-01

 

Art. 93 - 01

H type galvanized bracket for staves junction (this is necessary when transpallets art used).

 

Art. 93 - 02

Galvanized bracket for staves junction

 

bracket 93-01 use

bracket 93-02

 

SCREWS AND NUTS

 

screw + nut

 

Art. 93 - 80 Zinc plated screw M8 x 16 (Package of 200 pieces)

Art. 93 - 81 Zinc plated nut M8 (Package of 200 pieces

 

FINISHING PROFILES

 

finishing profile 93-70 and 93-71

 

Art. 93 - 71

L type finishing profile mm 100 x 58 lenght mm 2.500

profile 93-70 and 93-71 use

 

 

Art. 93 - 70

U type suitable to close the assembled staves front side. Lenght mm 2.500

STEPS SUPPORT FOR LADDERS

Ideals to built dissassemblable ladders using antislipping steps mm 300 width or bulged staves mm 250 widht. They must be welded or fixed (they are equipped with proper holes) to the side member of the ladder. The assembly with the steps is performed using M8 bolts.

 

support 93-20

 

Art. 93 - 20 D and 93 - 20 S

Right and left support for stepe mm 250 width supplied unrefined. Dimensions mm 250 x 58 h., thickness 20/10, equipped with stiffenings ribs. They are marked sin. (left) and dex (right) to be easily distingushed.

Art. 93 - 25

Support for steps mm 300 width. It can be used for right or left support. They are supplied unrefined. Dimension mm 300 width x mm 60 height, thickness 25/10.

 

.

support 93-25

parolin
Materials and informations on this site are exclusive property of Parolin Ltd: all rights reserved.
Website users can use the informations and materials contained therein for personal use only and not for commercial purposes.